LMSPV320 | LAB INSTRUMENTS

Microwave Digestion System ,Total Organic Carbon Analyzer (TOC)

LMDS600

Microwave Digestion System

# 7 inch color Touch Screen Display.

# Standard 6 vessels

# Vertical design for even distribution of
microwave.

# Real-time monitoring for both temperature
and pressure of each vessel.

# Imported vessel material for both sample
vessel and protection vessel highly ensures
safety.

LTOC1000

Total Organic Carbon Analyzer (TOC)

# Detection range - 0.001 - 1.500mg/l (ppm).

# Equipped with Conductivity detector.
to quantify TOC Concentration.

# 7 inch Touch Screen Display.

# The system is password protected & in
compliance with 21CFR Part11 Requirements.

# 8GB large storage memory.

# Quick Test & Analysis in < 3 minutes.

COD Analyzer with Digestor , BOD Analyzer

COD1500

COD Analyzer with Digestor

# Measuring range:0 to 150, 0 to 1500 ppm

# COD Analyzer is water quality analyzer.

# LCD display.

# 2 LED light sources for different COD

# Testing ranges.
Data capacity 200 sets (GLP-compliance).

# 2-point calibration.

# COD Digestor also available.

COD Digestor

BOD4000

BOD Analyzer

# Measuring principle: differential pressure
(manometric).

# BOD value of the current test can be
read at all times.

# Measuring Range - 0 to 4000 mg/l (ppm)
can be measured using different sample
volumes.

Visible Spectrophotometer , Peltier /Sipper System

Double Beam / Single Beam UV-Vis Spectrophotometer

LMSPUV1900 , 1908 , 1920 , 1928

Double Beam UV-Vis Spectrophotometer

# LMSPUV1900 Bandwidth – 1nm

# LMSPUV1908 -Variable Bandwidth(1/2/4nm)

# Optical System– Double Beam

# Grating 1200lines/mm
Wavelength Range – 190-1100nm

# Wavelength Accuracy - ±0.3nm

# Scanning Speed – Fast, Medium & Low

# Light Source – D2 Lamp & Tungsten Lamp

LMSPUV1200

Single Beam UV-Vis Spectrophotometer

# Wavelength Range – 190-1100nm

# Bandwidth – 2nm

# Optical System– Single Beam

# Grating 1200 lines/mm

# Wavelength Accuracy - ±0.8nm
# Wavelength Setting – Automatic

# Light Source – D2 Lamp & Tungsten Lamp

LMSPUV1000B

Single Beam UV-Vis Spectrophotometer

# Optical System – Single beam

# Grating 1200 lines/mm

# Wavelength Range – 190-1000nm

# Bandwidth – 2nm

# Wavelength Accuracy - ±1nm

# Wavelength Repeatability - ±0.5nm
Wavelength Setting – Automatic

# Light Source – D2 lamp & Tungsten Lamp

Double/ Single Beam UV-Vis Spectrophotometer -Touchscreen

LUV2100T

Double Beam UV-Vis Spectrophotometer Touchscreen

# Wavelength range 190 -1100 nm.

# LUV2000T - Bandwidth-1nm.

# LUV2100T-Variable Bandwidth(1/2/4/5nm).

# Wavelength Accuracy - +0.1nm.

# Display - 10 inches Touch Screen.

# GLP & GMP Standards.

# 21CFR Part 11.

# Memory - 32GB.

LUV2000T

Single Beam UV-Vis Spectrophotometer

# Wavelength range 190 -1100 nm.

# Bandwidth - 2 nm.

# Wavelength Accuracy - +0.5 nm.

# Display - 10 inch Touch Screen.

# 21CFR Part 11.

# Memory - 32GB.

LUV1100T

Single Beam UV-Vis Spectrophotometer Touchscreen

# Single Beam UV-Vis. Spectrophotometer.

# Wavelength range 190 -1100 nm.

# Bandwidth - 2 nm.

# Wavelength Accuracy - +0.5 nm.

# Display - 10 inch Touch Screen.

# 21CFR Part 11.

# Memory - 32GB.

Probe Sonicator

PRO660R

Touch screen Probe Sonicator with Remote

# 7" TFT Touch screen with remote control

# In built LED light in sound proof enclosure

# Temperature Meter display on screen.

# Circulating Glass beaker to rotate the sample

# Pulse/Frequency & Time Graph in Wave
formation.

# Ultraviolet Sterilization function.

# Power 6.5 - 650W adjustable.

# With Soundproof Enclosure

# Standard Probe - 6mm

PRO656 , PRO900 , PRO1200

Touch screen Probe Sonicator

# 7" TFT Touch screen display.

# In built LED light in sound proof enclosure

# Temperature Meter display on screen.

# Circulating Glass beaker to rotate the
sample- Standard Supply.

# Pulse/ Frequency and Time Graph
in Wave formation.

# PRO656 - Power 6.5 - 650W adjustable

# PRO900- Power 9 - 900W adjustable.

# PRO1200- Power 12 - 1200W adjustable.

# With Soundproof Enclosure

# PRO656 & PRO900- Standard Probe- 10mm

# PRO1200 - Standard Probe- 20mm

PB2 ,3 ,6 ,8 ,10, 12 ,15 ,20 ,22

Probe

Refrigerated Circulating Bath

RCB1020T

Refrigerated Circulating Bath

# Touch screen Display.

# PT100 temperature sensor.

# Folding handles for easy movement.

# PID temperature control system.

# Stainless steel inner tank.

# Waterlevel alarm function.

# Pump flow rate 8L/min.

# Programmable temperature controller.

RCB620T

Refrigerated Circulating Bath

# Touch screen Display, Horizontal Design

# Specialized Model to attach Viscometer on
Top

# PT100 temperature sensor.

# Folding handles for easy movement.

# PID temperature control system.

# Stainless steel inner tank, Overheat
protection.

# Pump flow rate 6L/min.

Automatic Digital Polarimeter

ADP100CFR

Automatic Digital Polarimeter

# Dual Wavelength - 546nm & 589nm.

# Measuring Range +/- 90° (Optical Rotation)
+/-259°Z (Sugar).

# Compliance with Regulations GMP/ GLP/
FDA 21CFR Part 11.

# Display - 8 inch Colour Touch Screen.

# Temp. Control Mode - Peltier (In-Built).

# Memory - 16GB.

ADP45

Automatic Digital Polarimeter

# No. of Measuring Mode -4

# Optical Rotation, Specific Rotation,
Sugar, Concentration

# ADP45 - Measuring Range -45° +45°

# 8” Colour Display Datamatrix Touch Screen

# ADP90 Peltier built In

# Length of test tube – 100mm & 200mm

# Interface – USB & RS232C

ADP90

Automatic Digital Polarimeter

# No. of Measuring Mode -4

# Optical Rotation, Specific Rotation,
Sugar, Concentration

# ADP45 - Measuring Range -45° +45°

# ADP90 - Measuring Range - 90°+90°Unit - Angle°

# 8” Colour Display Datamatrix Touch Screen

# ADP90 Peltier built In

# Length of test tube – 100mm & 200mm

# Interface – USB & RS232C

Digital Refractometer , ABBE Refractometer

RFM100CFR

Automatic Digital Refractometer

# In built peltier for Temperature control.

# Window Operating System GMP/ GLP/ FDA 21CFR Part 11.

# 5 Digit Decimal point Precision.

# Display - 8 inch Colour Touch Screen

# High-resolution CCD detection system.

RFM950 , RFM970

Automatic Digital Refractometer

# Memory 1024 data

# Refractive index ND – 1.30000-1.70000

# Display – Touch Screen °Brix (BX) – 0 -100%

# Accuracy – Refractive index ND - ±0.0002

# Dissolved Solids °Brix - ±0.1%

# Temperature Display Range – 0 to 50°C

# RFM970 -Thermostatical Control – RT±10°C

# Temperature Control Accuracy - ±0.5°C

LMAR1317T

ABBE Refractometer

# Touch screen Display.

# Measuring Range 1.30000 to 1.72000.

# Fully automatic measuring system.

# Memory- 500 Readings.

# Temp. Range -20°C to +120°C.

# USB Interface, LED bulb

# 5 Digit Decimal Point Precision

Ice Flaker

LMIF200T

Ice Flaker

# Capacity 200kg / 24hrs.

# Touch Screen Display.

# Timer Function, Temperature Function.

# Large Storage capacity- 60kg.

# Refrigerant - R290A.

# Front & Back ventilation design.

# Outer body improved Solid type design.

# Base feet 8 nos .

# Stainless Steel Evaporator.

LMIF30T , 50T

Ice Flaker

# Capacity /24 hrs. - 30kg, 50kg, 100kg.

# Storage Capacity - 7kg, 15kg, 25kg.

# Input Power - 180W, 280W, 420W.

# Touch Screen Display.

# Front & Back ventilation design.

# Stainless Steel Construction.

# Refrigerant - R290A.

LMIF100T

Ultrasonic Cleaner

LMUC50 , 100

Ultrasonic Cleaner

# Capacity 50 L & 100 L.

# Ultrasonic Power 0-100% adjustable.

# Time setting 0-60min.

# Heating Temp. - RT. +5 ~ 100℃.

# Ultrasonic frequency 40kHz.

# SS304 stainless steel, 2mm thickness
tank for acid-proof, anti-corrosive.

# Advanced generator, sweep frequency.

LMUC35M

Ultrasonic Cleaner

# Capacity - 35L.

# Timer & Heater,
Mechanical Control by Knob.

# Ultrasonic power 0-100% adjustable.

# Time setting 0-30 min.
Heating Temp. - RT. +5 ~ 80℃.

# SS304 Construction Inner Tank.

# Lid & Basket is Standard Supply.

LMUC3D, 6D, 9D, 12D, 25D

Ultrasonic Cleaner

# Degas Function, Blue LED display.

# Normal & Soft power control selectable.

# Heating Temp. - RT. +5 ~ 80℃.

# Quality of handle upgraded for easy grip.

# Extra Power switch ON/OFF on back side
for Safety, Memory -Last test.

# LID & Basket is Standard Supply.
Drainage and cool fan available in 5L to 24L

Viscometer

LMDV60, 100 , 200

Digital Viscometer

# Measuring range –20-2,000,000 / 20-2,000,000 /20-6,000,000 mpa.s

# Speed – 0.3 to 60 /0.3 to 100 / 0.1 to 200

# No of speed – 8 / 18 / 54

# No of standard Spindle – 4

# Display – LCD, Output – RS232C Interface

# Measurement Accuracy - +/-1% (FS)

LVA30

Low Viscosity Adaptor

# Spindle range – 1~2K for LMDV60.

# Spindle range – 0.6~6K for range LMDV100

# Spindle range – 0.3~6K for LMDV200

# Low Viscosity adaptor is recommended for
low viscosity sample <20m. pas

# 20 to 30 ml sample is needed for test in
low Viscosity Adaptor (LVA30)

# Spindle Code.L0 is used with low Viscosity
Adaptor

SSA15

Small Sample Adaptor

# Small Sample Adaptor is recommended for
small sample volumes.

# Small Sample Adaptor used for Viscometer

# 10 to 20 ml sample test in small sample
Adaptor.

# Sample temperature can be controlled by
using Refrigerated Circulating bath(Optional)

Dry Bath Incubator , Digital Waterbath

DBI11T

Dry Bath Incubator

# DBI11T - Heating (Touch Screen)

# Temp. Control Accuracy - ±0.5°C

# Temp. Uniformity of Block - ±0.3°C

# Heating Time - ≤15min (25°C up to 100°C)

# Program – Support 5 Multipoint programs

# Standard Block – 35 x 2.0ml

DBI18 , 20

Dry Bath Incubator

# DBI20 - Heating, Cooling & Stirring

# DBI18 - Heating & Stirring

# Temp. Control Accuracy - ±0.5°C

# Temp. Uniformity of Block - ±0.3°C

# Heating Time - ≤15min (25°C up to 100°C)

# Program – Support 5 Multipoint programs

# Standard Block – 35 x 2.0ml

LMWB04 , 06

Digital Waterbath

# Column - 2 Rows 4 Holes , 2 Rows 6 Holes

# High Corrosion Resistance

# Temp. Resolution, 0.1 C, Accuracy ±0.5 C

# Power rating 800W / 1200W

# Internal volume (approx.) 12L , 18L

# High Precise Temperature Control.

# Temp. Resolution, 0.1 C, Accuracy ±0.5 C

# Temp. Range RT +5to 99.9° C

# Stainless Steel Tank

Vortex Mixer , Bio Chemistry Analyzer , Visual Colarimeter

LMVM60D

Vortex Mixer

# LCD Display with white back light

# Speed Timer (1~99h 59m 59s)

# Aluminum Alloy Base stable body

# Soft silicone foot pads

# Supply with Standard Head

# Operating Mode - 2 Types - Auto run sensor, continuous run for various Mixing application.

# Super shockproof, Bush less Motor.

BCA80

Bio Chemistry Analyzer

# 7’’touch screen, 800×480pixels.

# Ambient temperature 10℃-30℃

# Titanium alloy flow cell with small capacity & minimize cross-contamination

# Light source Halogen Lamp 10W/6V,

# Analysis method Kinetics, End point,
Two point, Multi-point.

# Optical System 340-800nm

LMCR80F

Visual Colarimeter

# Measuring Principle Visual, in terms of international colour scale units

# Modes –Transmittance, reflectance

# Measurement Ranges-0.1 -79.9, Red,0.1–79.9

# Yellow, 0.1 – 49.9 Blue, 0.1 -3.9 Neutral

# Viewing System – Fully Adjustable

# Light Source – Incandescent lamp

# Path Length – Up to 180 mm

# Amplification of the magnifiers – 1.9x

pH Meter ,Benchtop pH/mV/°C Meter ,Conductivity/TDS/Turbidity Meter

LMPH9

pH Meter - Economic

# Range – 0 to 14.00 pH

# pH Resolution – 0.1pH/0.01 pH

# Accuracy - ±0.01pH

# Calibration Points – up to 3 Points

# pH Buffer Options–USA(pH 4.01,7.00,10.01)

# Temperature Range – 0 to 100°C,

# Temperature
Compensation – Manual

# Memory – up to 25

LMPH10H

pH Meter - 3 points

# pH Range -2.00 to 16.00pH.

# Big Screen & Large LCD Display.

# with white backlight.

# Memory - upto 100 readings.

# USB Interface.

# 0.01pH Resolution.

# 3 points Calibration.

LMPH12

pH Meter - 5 points

# Built in real time clock stamps stored data
to meet GLP standards

# pH Range - -2000~20.000pH

# pH Accuracy ±0.002pH

# pH Resolution–0.001,0.01,0.1pH
(Selectable)

# Calibration – upto 5 Points

# pH Buffer Option–USA,NIST,DIN/User Define

# Memory – 500 readings with date & time

LMPH15

pH Meter with Printer - 5 points

# Built in real time clock stamps stored
data to meet GLP standards

# Range : -2.000 to 20.000 pH

# pH Resolution – 0.001, 0.01 (Selectable)

# Accuracy - ±0.002pH

# Calibration Points – up to 5 Points

# pH Buffer Options–USA,NIST,DIN,
User define

# Password Protection – 4 digits

# Memory – 1000 data sets

LMCM20H

Conductivity Meter - 3 points

# Conductivity range - 0 to 200ms/cm

# Big Screen & large LCD Display

# with white backlight.

# Memory- upto 100 readings.

# USB interface

# 0.001 Resolution.

# 3 points Calibration

LMTB200

Turbidity Meter

# Measurement Range – 0~2000 NTU

# Resolution –0.01, 0.1, 1

# Accuracy - ±2% of reading for 0~500 NTU ±3% of reading for 501~2000NTU

# Calibration Points – 2 to 7 points

# Light Source – Infrared –emitting diode

# Memory – Stores up to 200 data sets

# Display – 4.5” TFT display

# Password Protection -Yes

Water Quality Multiparameter ,Benchtop ION/pH/mV/°C Meter ,DO Meter

LMMP30

Multiparameter

# Built-in real-time clock stamps stored data
to meets GLP standards

# pH Range -2.000~20.000pH

# Resolution – 0.001, 0.01, 0.1pH, Selectable

# ORP (mV) Range – 0~ ±1999.9mV

# Conductivity Range – 0~200mS/cm

# TDS Range – 0~10ppt

# Salinity Range – 0~80ppt

# Resistivity Range – 0~100M

LMION40

Ion / pH / Meter

# Built –in real-time clock stamps stored data to meets GLP standards

# pH Range - -2.000 ~ 20.000pH

# pH Accuracy - ±0.002pH

# Resolution – 0.001, 0.01, 0.1pH (Selectable)

# Ion Concentration Range 0.001~19999 ppm,mg/L,mol/L

# Ion Concentration Accuracy ±0.5% Full Scale.

# (Monovalent),+1% Full Scale ( Divalent).

LMDO50

Dissolved Oxygen Meter

# DO Range 0.00-2.00mg/L or ppm

# DO Resolution 0.1,0.01ppm. (Selectable)

# DO Accuracy +0.2mg/L or ppm

# Saturation of Oxygen 0.0-200.0%

# Saturation Accuracy +2.0%

# Temperature Range 0.0~50.0°C

# Temperature Accuracy + 0.5°C

# Memory 500 data sets with Date & Time.

Magnetic Stirrer

LMMS300

Magnetic Stirrer

# Max. Volume – 2000 ml

# Speed – 100 /1250rpm

# Top Plate Size – 135 x135mm

# Plate Material – Steel

# Max. Temp.(Plate Surface) – 300°C

# Timer – 999 minutes

LMMS5LC

Ceramic Hotplate Magnetic Stirrer

# Speed – 200-2000 RPM

# Plate Size – 190 x 190mm

# Max. Volume (ml) – 5000ml

# Temp. Controller – PID
Max. Temp. (Plate Surface) - 300°C

# Temp. Accuracy -
±0.5°C(<100°C)±1°C(<300°C)

Online pH/ Conductivity Controller , Gradient Thermal Cycler - PCR

OPH11

Online pH Controller

# to 3 points calibration with auto buffer
recongnization.

# Range -1.00~15.00pH, Resolution–0.01 pH

# pH Buffer Option – USA (4.01/7.00/10.01)
or NIST (4.01/6.86/9.18)

# Low/High Alarm–0.00~14.00pH(Selectable)

# Signal Output 4 ~ 20mA.

# Automatic temperature compensation

# Interface - RS485

OCM21

Online Conductivity Controller

# 1 to 3 points calibration with auto
recognition of conductivity standards.

# Selectable cell constant, temperature
coefficient and TDS conversion factor.

# Signal Output 4 ~ 20mA

# Automatic temperature compensation
(In built) ensures accurate readings
over the entire range.

# Interface - RS485

PCR9602G

Gradient Thermal Cycler - PCR

# Capacity – 96 x 0.2ml

# Temperature Range – 0 ~ 100°C

# Max. Heating Rate-5°C/s Cooling Rate-4°C/c

# Uniformity & Accuracy - ≤±0.1°C

# Temperature Control – Block/Tube

# Gradient Temp. Range – 30 ~ 100°C

# Number Of Programs–10000 +(USB FLASH)

# Max. No. of Step – 30,

# Max. No. of Cycl–99

# LCD Display – Touch Screen, TFT

ISE's , Conductivity Cell , Electrodes

ISE62

Nitrate Combination Electrode

# Limits (ppm) – 6200 ppm to 6.2 ppm

# Temperature Range – 5 to 60°C

# Slope -54 to 60 mV

# Cable Length – 1 Meter

# Connector – BNC

# Accessories – Nitrate standard solution

Fluoride Combination Electorde

# Limits (ppm) – 1900 ppm to 0.2 ppm

# Temperature Range – 5 to 60°C

# Slope -54 to -60 mV

# Cable Length – 1 Meter

# Connector – BNC

# Accessories – Fluoride standard solution
& TISAB (500ml),IFS (30ml)

ISE19

Fluoride Combination Electorde

# Concentration range – 10-1M to 10-5M

# Limits (ppm) – 1900 ppm to 0.2 ppm

# Temperature Range – 5 to 60°C

# Slope -54 to -60 mV

# Cable Length – 1 Meter

# Connector – BNC

# Accessories – Fluoride standard solution
& TISAB (500ml),IFS (30ml)

CC1 , CC2, CC3

Conductivity Cell

# Cell Constant 1K / 0.1K / 10K

# Cell Constant Accuracy 1±0.2/0.1±0.02/10±2

# Measuring Range:
1K-0.01ms/cm to 10ms/cm

0.1K-0.1μs/cm to 100μs/cm

10K-0.1ms/cm to 200ms/cm

# Material Platinum Foils, Glass Body

# Electrode Length 155mm

# Cable length 1 meter with Electrode

PE6

Online pH Electrode

PE6 Online pH Electrode is designed for the measurement of the pH and temperature in aqueous solution and is suitable for continuous use in process application.

ER1

pH Electrode - Plastic

# pH Range : 0 - 14.00pH.

# Temp.range : 5°C to 60°C.

# Liquid Junction Type : Fiber.

# Application - General purpose, School college, Lab use, etc.

# www.labman.net.in

ER2

pH Electrode - Plastic

# pH Range : 0 - 14.00pH.

# Temp.range : 5°C to 60°C.

# Liquid Junction Type : Fiber.

# Plastic Type .

# Application - Waste Solution, not suitable for Strong Acid / Alkaline Solution Measurement.

ER3

pH Electrode - Plastic

# pH Range : 0 - 14.00pH.

# Temp.range : 5°C to 60°C.

# Liquid Junction Type : PTFE Ring.

# Plastic Type.

# Application - High/Low Ionic.
Concentration samples like rain water, Drinking water.

ER4

pH Electrode - Plastic

# pH Range : 2 - 12.00pH.

# Temp.range : 5°C to 60°C.

# Liquid Junction Type : PTFE Ring.

# Plastic Type - Flat Surface

# Application - Food, Cheese, Paper, Skin, Meat, Butter, etc.

ER5

pH Electrode - Glass

# pH Range : 0 - 14.00pH.

# Temp.range : 5°C to 90°C.

# Liquid Junction Type : Ceramic.

# Glass type .

# Application - Strong Acid Alkaline, Organic Solution Measurement.

ER6

pH Electrode - Glass

# pH Range : 2 - 12.00pH.

# Temp.range : 5°C to 90°C.

# Liquid Junction Type : Ceramic.

# Glass type .

# Application - Low Ionic Strength. Measurement Solution, like high pure water.

ER7

ORP (Redox) Electrode - Plastic

# Temp.range : 5°C to 60°C.

# Sensor Type : Pt Pin.

# Plastic Type

# Millivolt range(Redox) +1000mV.

Application - General Application of ORP (Redox) Measurements.

ER8

ORP (Redox) Electrode - Glass

# Redox Potential Measurements.

# Temp.range : 5°C to 90°C.

# Sensor Type : Pt Ring.

# Millivolt range(Redox) +1000mV.

# Glass Type

# Application - High temperature
Redox Potential Measurements

Updated as on November 2024